1865-52 Component Test Fixture

1865-52

Double click on above image to view full picture

Zoom Out
Zoom In
More Views

Photo represents example of series. See datasheet for more details on any specific model.

  • The fixture simplifies the connection and measurement of leaded and chip components while maximizing operator ease of use and safety. 
Priced at $3,384

Estimated Delivery is 2 to 4 weeks

Repair/Calibration Quote Technical Support Request
  • Simplifies the connection and measurement of leaded and chip components for the 1865

 

The 1865-52 Component Test Fixture is an accessory for IET Labs's Model 1865+ Megohmmeter/IR Tester. The fixture simplifies the connection and measurement of leaded and chip components while maximizing operator ease of use and safety. The fixture is supplied with plug-in modules for leaded and surface mount components, plus banana-plug cables and alligator clips for connecting a wide variety of other component styles. The unit is designed with a shielded case to reduce potential measurement errors due to electrical noise and a hinged cover, with a safety interlock switch, is included for operator safety. A start button, test active, pass, and fail indicators are conveniently located on the fixture for operator convenience and ease of use.


1865-52 Basic Specifications
Measurement Range
: 1 x 103 to > 1 x 1014 ohms
Test Voltage: 1000 volts maximum
Test Current: 10 mA maximum
Leakage Current: ≤ 0.5 pA with maximum voltage applied for greater than 1 minute
Components Axial lead module: Body size ≤1 inch, Accommodated: Lead size ≤1.4 mm dia
SMD module: Width: 0.5 - 10 mm, Height: 0.5 -10 mm (dia: 0.5 to 3.0 mm), Length: 0.1 - 8 mm
Alligator clips: ≤5 mm diameter
Other Features: Start Button Safety Interlock Switch, Pass/Fail Indicators Test Active Indicator
Terminals: Sheathed Banana Jacks (4) rear panel: high, low, ground and guard
Mechanical: Bench mount: Dimensions: (w x h x d): 8 x 5.5 x 9in (203 x 140 x 230mm)
Weight: 5 lbs (2.3 kg) net, 9 lbs (4 kg) shipping
Environmental: Operating: 0 to +50 degrees C, Storage: -40 to +70 degrees C
Accessories Supplied: Axial Lead Plug-in Module, SMD Plug-in Module, Flat Table Plug-in Module, 100 kΩ Double Banana Plug Resistor (800166), 1 MΩ Double Banana Plug Resistor (800167), Double Banana Plug (solder terminals: component mounting), Double Banana Plug Shorting Bar, Miniature Banana Plug Cable (4), Alligator Clip (1 red, 2 black), Alligator Clip, Miniature (4), 1865-51 Cables for Connection to 1865, Carrying Case for Accessories, Instruction Manual

Would you like to proceed with your quote, or continue to add products to your quote cart?