- Precision Handheld LCR Meter: up to 0.3% Accuracy
- Wide Range of Selectable test frequencies: 100 Hz / 120 Hz / 1 kHz / 10 kHz / 100 kHz
- Measures: Resistance, Capacitance, Inductance, Dissipation Factor, Quality and Phase Angle
- Backlit 20,000/2,000 count display
- Component sorting function with selectable PASS/FAIL tolerances
- Selectable: series or parallel LCR Meter
- Light weight Handheld LCR Meter
- Alligator Leads included, SMD tweezers available
- USB interface for Data Storage of LCR Results
- Allows for 4-Wire Kelvin Measurment to factor out impedance of test leads
The DE-500 is a high-performance handheld LCR meter that is full-featured yet cost effective. It rivals the capabilities and options of many of its bench counterparts. It measures:
Ls/Lp -- Series and parallel inductance
Cs/Cp -- Series and parallel capacitance
Rs/Rp -- Series and parallel resistance (ac)
Rdc/Rp -- Series and parallel resistance (dc)
ESR/Rp -- Series and parallel equivalent resistance
D -- Dissipation factor
Q -- Quality factor
Θ -- Phase angle
This handheld LCR meter can transfer data to a PC via a standard, fully isolated, optical IR-USB interface. It also features a Sorting mode, allowing users to quickly sort components.
The DE-5000 handheld LCR Meter has automatic impedance selection. This allows the user to measure the L/C/R components in Auto LCR mode without having to select the type of measurement.
To accommodate various test requirements, the DE-5000 handheld LCR Meter offers selectable test frequencies: 100 Hz / 120 Hz / 1 kHz / 10 kHz / 100 kHz.
The LCR Meter is powered by a standard 9V battery. For additional convenience, it may also use an optional ac adapter (DE-5000-AC).
To transfer data to a PC, the LCR Meter comes with a built-in IR interface. IET offers an optional Data Transfer Kit (DE-5000-DTK). This kit includes: IR-USB interface adapter, a USB cable, and a CD with software for the PC.
Click Here to download the software associated with the USB Data Kit and Product Manual. Unzip the folder and follow the instructions to install.
DE-5000 Handheld LCR Meter Basic Specifications
Parameters measured:
Ls / Lp / Cs / Cp / Rs / Rp / DCR with D/Q/Θ/ESR measurement
Automatic L-C-R selection
Accuracy:
As good as 0.3% See datasheet for more info
Selectable test model:
Series or Parallel
Display:
Backlit 20,000/2,000 LCR Metercount
Input connection:
Accepts normal or shrouded banana plugs 2-Wire plus separate Guard
Automated LCR ranges:
L: 20.000 μH -- 2000 H
C: 200.00 pF -- 20.00 mF
R: 20.000 Ω -- 200.0 MΩ
DCR: 200.00 Ω -- 200.0 MΩ
Selectable test frequencies:
100 Hz / 120 Hz / 1 kHz / 10 kHz / 100 kHz
Measurement rate:
1.2/second nominal
Available tolerances for sorting function:
±0.25% ±5% ±0.5% ±10% ±1% ±20% ±2% -20/+80%
Response time:
Approx. 1 second/DUT
Temperature coefficient:
[0.15 x (specified accuracy)]/°C 0-18°C, 28-50°C
Test signal level:
0.5 Vrms Typical
Environmental:
LCR Meter Operating temperature: 0°C to 50°C; <70% RH
LCR Meter Storage temperature: -20°C to 60°C; <80% RH
Battery:
Uses a standard 9V alkaline battery. Display includes battery level indicator
Mechanical:
Dimensions: 18.8 cm H x 9.5 cm W, 5.3 mm D (7.4" x 3.75" x 2")
Weight: 350 g (0.75 lb)
