The store will not work correctly in the case when cookies are disabled.
JavaScript seems to be disabled in your browser.
For the best experience on our site, be sure to turn on Javascript in your browser.
Resistance Substituters IET manufactures a variety of RTD simulators for the field, the laboratory or automated stations. For
high performance consider the RTD series; for programmable and lower cost consider the PRTD or OS
series; and for good performance lost cost consider the RS-RTD. All our RTD simulators use physical
"real" resistors.
Temperature/Resistance Translation Tables.
esi SR1 Calibration Resistor
New Design, with improved specifications Versatile working calibration resistor Laboratory standard of high accuracy and stability Adjusted to within 20 ppm of nominal 50 ppm long-term accuracy for most values
DCCS DC Current Shunt Series
Allows for high current calibration, up to 60 A Resistances ranges from 100 µΩ - 1 kΩ High accuracy 0.02% Suitable for direct current & audio frequencies Oil-filled design ensures great long term stability <0.01% over many years
RTD Series - Precision RTD Simulator
Highest accuracy, highest stability, lowest TC of any RTD Simulator available Accuracy for Z Series: 0.005% (0.012 ºC for PT 100) Resolution: 1 mΩ (0.0025 ºC for PT 100) Stability 0.0002% for 24 hours; 0.001% for 12 months
LOM-530 Micro-Ohmmeter Calibration Kit
Complete set of (5) working standard resistors for calibration of micro-ohmmeters. Resistance values can be custom modified per your requirement. Calibrates a wide verity of micro-ohmmeters from various manufacturers
esi SR1010 Resistance Transfer Standard
Resistance Transfer Standards available in the following values 1 Ω, 10 Ω, 100 Ω, 1 kΩ, 10 kΩ, 100 kΩ Initial Accuracy... ± 20PPM of nominal value matched within 10PPM Transfer Accuracy... ± (1PPM + 0.1uΩ at parallel value) for 100:1 Transfer Accuracy... ± (1PPM + 1uΩ at series parallel value) for 10:1 Long Term Accuracy... ± 50PPM of nominal value Calibration Accuracy... ± 10PPM
VRS-100 Series High Resistance Standards
Set of nine, ten or eleven resistors - 1 kΩ, 10 kΩ, 100 kΩ,1 MΩ, 10 MΩ, 100 MΩ, 1 GΩ, 10 GΩ, 100 GΩ, 1 TΩ and 10 TΩ , open circuit (Depending on model) High Accuracy - up to 20 ppm Standard voltage: up to 5 kV (voltages of 10 kV are available) Excellent for calibration of Meggers For higher resistance values above 10 TΩ see SRC-T Network Standards
esi SR1030 Series Oil Immersed Transfer Standard
Resistance Values of 1 Ω - 100 kΩ Initial Accuracy... ± 20 PPM of nominal value matched within 10 PPM Transfer Accuracy... ± (1 PPM + 0.1uΩ at parallel value) for 100:1 Long Term Accuracy... ± 50 PPM of nominal value Calibration Accuracy... ± 10 PPM
SR102/103/104 Series
Highest accuracy (1 ppm/yr) and stability (±0.5 ppm/yr typical) of any resistance standard Lowest temperature coefficients (< 0.1 ppm/ºC) Available in 3 models: 100Ω, 1000 Ω, 10,000Ω. Has remained the foremost resistance standard, with no equivalent, for over 35 years 5 Year Warranty Included
PRS-330 Precision Programmable Resistance Box & RTD Simulator
Resistance range: 0.1 Ω to 20 MΩ with a Resolution of 1 μΩ or 6 digits Lab grade accuracy (70 ppm + 1 mΩ): 1.5 times better than conventional manual decade resistors Manual or Programmable resistor with USB, Ethernet and IEEE interfaces all standard Very low long term maintenance cost- with an 5 year warranty About 10% lower in cost to the PRS-370 If you own 8.5 Digit DMM (Fluke 8508A, 8588A or Keysight 3458A) you should strongly consider the PRS-370 .
esi RS925D Resistance Decade
High accuracy - 20 ppm + 0.5 mΩ High stability - 20 ppm + 0.5 mΩ Resistance from 10 mΩ to 1.1 MΩ 20 μΩ resolution Precise fixed minimum resistance