Decade Resistor

Resistance Substituters

IET Labs manufactures a full line of resistance decade boxes that will meet any application. Our resistance decade boxes can be custom built to your specifications, so you do not have to pay for what you don't need.
IET Labs, maintains some of the finest R, L and C calibration standards in the World. IET Labs continues to manufacture and support a wide variety of products that were originally manufactured by GenRad, esi, QuadTech and others. The majority of IET’s products are manufactured with pride in the USA.

1433 Series Precision Decade Resistance Box
Find out more about our different decade box models

Items 16 to 20 of 20 total

per page
Page:
  1. 1
  2. 2

Set Descending Direction
  1. SR-1050 Transfer Standard

    esi SR1050 Series 1M & 10 M Resistance Transfer Standard

    • Resistance Values 1 MΩ & 10 MΩ
    • Initial Accuracy... ± 25 or 30 ppm of nominal value matched within 10 ppm
    • Transfer Accuracy... ± 2 ppm (Typical Short-term Repeatability)
    • Calibration Accuracy... ± 10 or 15 ppm
  2. esi/Tegam DB62 Decade Resistance Box

    esi / Tegam DB62 Decade Resistor

    • Precision accuracy of ±(0.01% + 2 mΩ)
    • Resistance range from 0.01 Ω to 11.1111 MΩ
    • 4 models available, each covering six decades
    • High-performance solid silver-alloy contacts
    • Low zero resistance < 6mΩ
  3. esi RS925

    esi RS925D Resistance Decade

    • High accuracy - 20 ppm + 0.5 mΩ
    • High stability - 20 ppm + 0.5 mΩ
    • Resistance from 10 mΩ to 1.1 MΩ
    • 20 μΩ resolution 
    • Precise fixed minimum resistance
  4. Fluke 5320A-Load Hipot current calibration load resistor

    HPRS-HIPOT-LOAD (Fluke 5320A-Load Hipot Replacement) Hipot Current Calibration Load Resistors

    • 8 Resistances from 10 kΩ to 5 MΩ standard
    • Standard accuracy: ±10% at 23°C
    • Power rating : up to 300 W at 100 kΩ
    • Voltage rating: 1,400 to 5,500 V depending upon resistance value
    • Continuous operation at rated power
    • Kel-F washers on all terminals for low leakage current and high dielectric strength
    • Custom Values Available
  5. HPRS-Hipot-QuadTech-Load current calibration load resistor

    HPRS-HIPOT-QuadTech Hipot Current Calibration Load Resistors

    • 8 Resistances 0.8 Ω, and from 50 kΩ to 1 GΩ standard
    • Standard accuracy: ±5% at 23°C
    • Power rating : up to 200 W at 50 kΩ
    • Voltage rating: 2,000 V peak except 0.8 Ω
    • Continuous operation at rated power
    • Kel-F washers on all terminals for low leakage current and high dielectric strength
    • Custom Values Available See HPRS-Hipot-Load

Items 16 to 20 of 20 total

per page
Page:
  1. 1
  2. 2

Set Descending Direction