Resistance Standard

Resistance Standards

IET manufactures a full line of resistance standards designed to satisfy any requirement. From highest precision to cost effective - From 1 milliohm to 100 Teraohms and every value in between. If you don't find the resistance standard you need from the many choices available, we will build it for you.

IET Labs, maintains some of the finest R, L and C calibration standards in the World. IET Labs continues to manufacture and support a wide variety of products that were originally manufactured by GenRad, esi, QuadTech and others. The majority of IET’s products are manufactured with pride in the USA.

Find out more about our different resistance standard models

3 Item(s)

per page

Set Ascending Direction
  1. Resistance Transfer Standard

    esi SR1030 Series Oil Immersed Transfer Standard

    • Resistance Values of 1 Ω - 100 kΩ
    • Initial Accuracy... ± 20 PPM of nominal value matched within 10 PPM
    • Transfer Accuracy... ± (1 PPM + 0.1uΩ at parallel value) for 100:1
    • Long Term Accuracy... ± 50 PPM of nominal value
    • Calibration Accuracy... ± 10 PPM
  2. SRR High Accuracy Standard Resistors

    SRR Series High Accuracy Standard Resistor

    • High accuracy four-terminal standard resistors
    • Resistance Value of: 0.0001 Ω, 0.001 Ω, 0.01 Ω, 0.1 Ω
  3. Megger Calibration Set of High Resistance Standards

    VRS-100 Series High Resistance Standards

    • Set of nine, ten or eleven resistors - 1 kΩ, 10 kΩ, 100 kΩ,1 MΩ, 10 MΩ, 100 MΩ, 1 GΩ, 10 GΩ, 100 GΩ, 1 TΩ and 10 TΩ , open circuit (Depending on model)
    • High Accuracy - up to 20 ppm
    • Standard voltage: up to 5 kV (voltages of 10 kV are available)
    • Excellent for calibration of Meggers

3 Item(s)

per page

Set Ascending Direction