esi SR1 Calibration Resistor

Calibration Resistor

Double click on above image to view full picture

Zoom Out
Zoom In
More Views

Photo represents example of series. See datasheet for more details on any specific model.

  • New Design, With Improved Specifications
  • Versatile working Calibration Resistor
  • Laboratory standard of high accuracy and stability
  • Adjusted to within 20 ppm of nominal
  • 50 ppm long-term accuracy for most values
Prices range from $640 to $1595

Estimated Delivery is 4 to 6 weeks

Repair/Calibration Quote Technical Support Request

NEW DESIGN, IMPROVED SPECIFICATIONS

For a wider range of resistance values with similar performance at the same price consider our SRX Series

The Model SR1 Calibration Resistors is a laboratory standard of high accuracy and stability. The resistance of most values is initially adjusted to an accuracy of 20 ppm of nominal, with long-term accuracy guaranteed to better than 50 ppm. Other values have initial accuracy from 50 ppm to 200 ppm.

Model SR1 Calibration Resistor has been constructed to meet today’s high standards of performance. The resistance wire used is a modern alloy with excellent stability, an extremely low temperature coefficient over a wide range of temperatures, and very low thermal EMF to copper. A unifilar winding on a flat mica card is used to minimize both series inductance and shunt capacitance. The durable aluminum case provides electrostatic shielding. Gold plated terminals reduce connection errors.

Terminals appear on the top of each unit. They are also brought out the bottom of the case on removable banana plugs. This allows plugging two or more units together in either series or parallel for a wide variety of resistance values. Four-terminal resistance measurements are easily made by using the banana plugs on the bottom of the case as two of the terminals. 0.01 Ω and 0.1 Ω values have four terminals on the top and should only be used in four-wire configurations. For three-terminal or five-terminal guarded measurements, a binding post on top and a banana plug on the bottom provide connections to the case.

 
SPECIFICATIONS

Nominal Value

Model

Number

Adjustment to nominal

Stability per year

Calibration
Uncertainty

Temperature
coefficient

Power
coefficient

Max power

Max

current

Max

voltage

Terminals

0.01 Ω

SR1-0.01

200 ppm

100 ppm

50 ppm

20 ppm/°C

0.1 ppm/mW

2 W

14 A

0.15 V

4 bp's + gnd

0.1 Ω

SR1-0.1

200 ppm

20 ppm

50 ppm

20 ppm/°C

0.1 ppm/mW

1 W

3.0 A

0.3 V

4 bp's + gnd

1 Ω

SR1-1

20 ppm

10 ppm

20 ppm

10 ppm/°C

0.5 ppm/mW

0.25 W

0.5 A

0.5 V

4 bp's + gnd

10 Ω

SR1-10

10 ppm

5 ppm

10 ppm

3 ppm/°C

0.15 ppm/mW

0.1 W

0.1 A

1 V

4 bp's + gnd

100 Ω

SR1-100

10 ppm

5 ppm

10 ppm

1 ppm/°C

0.05 ppm/mW

0.1 W

30 mA

3 V

4 bp's + gnd

1

SR1-1k

10 ppm

2 ppm

10 ppm

1 ppm/°C

0.05 ppm/mW

0.1 W

10 mA

10 V

4 bp's + gnd

10

SR1-10k

10 ppm

2 ppm

10 ppm

1 ppm/°C

0.05 ppm/mW

0.1 W

3 mA

30 V

4 bp's + gnd

100

SR1-100k

10 ppm

2 ppm

10 ppm

1 ppm/°C

0.05 ppm/mW

0.1 W

1 mA

100 V

4 bp's + gnd

1 MΩ

SR1-1M

20 ppm

5 ppm

15 ppm

3 ppm/°C

0.15 ppm/mW

0.1 W

0.3 mA

316 V

2 bp's + gnd

10 MΩ

SR1-10M

20 ppm

10 ppm

20 ppm

5 ppm/°C

0.25 ppm/mW

0.1 W

0.1 mA

2000 V

2 bp's + gnd

 

Calibration conditions:

At 23°C, low power, traceable to SI

<1 MΩ: Five-wire

≥1 MΩ: Three-wire

Terminals:

Gold-plated, tellurium-copper, low-thermal-emf binding posts on standard 3/4 inch spacing. A GROUND terminal is provided on all units

Mechanical information:

Dimensions: 10.2 cm W x 8.9 cm H x 14.0 cm D(4.0" W x 3.5" H x 5.5" D)
Weight: 0.9 kg (2 lbs)

 

Would you like to proceed with your quote, or continue to add products to your quote cart?