Powder, Paste and Liquid Cell MC-100

Powder, Paste and Liquid Cell MC-100

Double click on above image to view full picture

Zoom Out
Zoom In
More Views

Photo represents example of series. See datasheet for more details on any specific model.

  • Designed for use with: Paste, grease, very viscous material, liquids, powder

Priced at $8,895

Estimated Delivery is 4 to 8 weeks

Repair/Calibration Quote Technical Support Request

Description

The MC-100 Dielectric Cell is designed for dielectric constant and dissipation factor measurements on viscous or paste materials. The cell consists of two electrodes that are adjustable from 0 to 100mils. Accuracy of setting is 0.000125 inches. The electrodes are positioned horizontally. Materials are applied into the center of the lower ring. The top electrode is then to sandwich the material between the electrodes.

The cell can be used with most viscous material such as: pastes, grease, extremely small samples, liquids and powders like toner.

Designed for use with: Paste, grease, very viscous material, liquids, powder

Required Accessories:

1 x 1689-9602 1 Meter BNC to BNC cable set
2 x LD-02 BNC T Adapters
1 x LD-08 GR874 to BNC Adapter
1 x LD-05 BNC to Banana Adapter

Specifications

Terminals: three terminals with grounded shield
Material: Stainless with Pyrex or acrylic glass cylinder
Electrode: 1” diameter
Connectors: GR874 and banana jack

 

Would you like to proceed with your quote, or continue to add products to your quote cart?