Teflon Standard- TS-100

Teflon Standard- TS-100

Double click on above image to view full picture

Zoom Out
Zoom In
More Views

Photo represents example of series. See datasheet for more details on any specific model.

  •  Invaluable tool in verifying the operation of any rigid dielectric cell such as the LD-3 and LD-3T

Priced at $895

Estimated Delivery is 6 weeks

Repair/Calibration Quote Technical Support Request

Description

The TS-100 Teflon Standard is an invaluable tool in verifying the operation of any rigid dielectric cell such as the LD-3 and LD-3T.  The TS-100 consists of a 3 inch/7.5cm  diameter and 0.235 inch/5mm thick Teflon standard.  The Teflon Standard is calibrated using a IET 1620A Capacitance Bridge at 70 Deg. F at 1kHz.  The Teflon Standard will have a nominal dielectric constant of 2.04.  Wood case not included.

Specifications

Size Nominal: 3” OD x 0.235”
Flatness: within 100 millionths of an inch
K Nominal: 2.04
Calibration: Calibrated value using LD-3 Cell and IET 1620A at 1kHz, 70 Deg F.

Specifications

Size Nominal: 3” OD x 0.235”
Flatness: within 50 millionths of an inch
K Nominal: 2.0
Calibration: Calibrated value using LD-3 Cell and IET 1620A at 1kHz, 70 Deg F.

 

Would you like to proceed with your quote, or continue to add products to your quote cart?