The store will not work correctly in the case when cookies are disabled.
SRX-NI-4082 Standard Resistor Calibration Set
- Very stable - drift < 50 ppm/yr
- Excellent temperature coefficient - 2 ppm/°C
- Rugged
- Set consists of 4 resistance standards:
25 Ω, 125 Ω, 5 kΩ, 100 kΩ values as recommended by NI PXIe-408x calibration procedure
- 3/4" spacing for direct connection to the NI PXIe-4082
- Low inductance < 0.08 µH
- Accredited Calibration
- In addition to the standard values, any custom value is available. Please contact the IET sales department, for more information
IET 1403-1pF-BNC High Frequency Standard Capacitor
- Available in values from 0.001 pF - 1000 pF
- Excellent performance at high frequencies
- ISO-17025 accredited calibration included with the standard
- NEW 1403-1pF-BNC version
Consult IET Labs, Inc for pricing information
1865+ Digital Megohmmeter I/R Tester
- Measurements from 1 kΩ to 100 TΩ, with auto ranging
- 0.5% measurement accuracy
- High-visibility blue LCD graphical display for menu programming and test results
- Programmable test voltage from 1 to 1000 Vdc
- RS-232 Interface, USB host port, optional IEEE
GenRad 1689 Precision Impedance Meter
- The world's standard for AC resistance, low frequency inductance and Capacitance measurement
- 0.02% Measurement Accuracy and +/- 0.0001 Df
- Programmable Frequency 12 Hz - 100 kHz
- Widely accepted impedance meter in a metrology environment
- 1689 has a built-in 4 terminal kelvin fixture for testing axial and radial components
- 1689M has four BNC connectors for use with a wide variety of standard accessories
GenRad 1409 Series Standard Capacitor
- Values 0.001 µF (100 nF) to 1000 µF
- Stability as good as ±0.01 %/year
- Two-to-five terminal configuration, depending on model
- Calibration accredited to ISO-17025 included
- 3 year warranty included
GenRad 1542 Stroboscope
- Low-cost, excellent US Manufactured stroboscope for stopping motion
- Up to 3800 bright-white flashes per minute -to observe motion as fast as 40,000 rpm
- Simple push-button operation
- Compact, light-weight, rugged
GenRad 1491 D, G Precision Decade Inductor
- Most accurate decade inductor commercially available, accuracy's as good
as 0.8%
- Inductance range from 1 mH or 100 µH to 11 H
- Shielded toroidal cores for small mutual inductance and minimal effect
from external fields
- Sealed against moisture for long-term stability
GenRad 1422 Series Variable Air Capacitors
- Range as low as 0.002 pF and as high as 1150 pF (Depending on Model)
- Stability: better than 0.02% full scale per year
- Settable to 40 ppm
- Low temperature coefficient, low losses
- Wide selection to suit needs
GenRad 1404 Series Primary Standard Capacitors
- Available in 10 pF, 100 pF,1000 pF, 5000 pF 10,000 pF
- 20 ppm/year stability, history has shown this to be a very conservative
specification
- The national laboratory standard for capacitance
- For calibrating highest level standards
- Standard for dissipation factor
- 5 year warranty included
GenRad 1433 Series Decade Resistor
- Precision accuracy of 0.01%
- Resistance range from 1 mΩ to 111.11111111 MΩ
- 36 models available, 3 to 11 dials
- Long life switches with silver-alloy contacts