Scrolling Catalog

GenRad 1409 Series Standard Capacitor

SCA Series Capacitance Standard

• Values from 1 pF to 10,000 µF in any custom value available
• Stability as good as ±0.01 %/year
• Two-to-five terminal configuration, depending on model
• Excellent TC: as low as 10 ppm/°C
• 3 year warranty included

GenRad 1404 Series Primary Standard Capacitors

• A national laboratory standard
• For calibrating working standards
• Standard for dissipation factor
• Available in 10 pF, 100 pF,1000 pF, 10,000 pF
• 5 Year Warranty Included 

HARS-LX Series Decade Resistance Substituter Lab Standard

• High accuracy - as good as 20 ppm
• High stability - as good as 5 ppm/yr
• Over 55 models available with resistance from 1 mΩ to 121.1 MΩ
• Resolution as good 1 mΩ with a fixed decade or 20 μΩ with a rheostat.

GenRad 1403 Series High Frequency Standard Capacitor

• Available in values from 0.001 pF - 1000 pF
• Excellent Performance at high frequencies
• ISO-17025 Accredited Calibration Included with the Standard

esi RS925D Resistance Decade

• High accuracy - 20 ppm + 0.5 mΩ
• High stability - 20 ppm + 0.5 mΩ
• Resistance from 10 mΩ to 1.1 MΩ
• 20 μΩ resolution 
• Precise fixed minimum resistance

HATS-LR Low Resistance Transfer Standard

• Values from 1 Ω - 100 kΩ
• Initial Accuracy... As good as 10 ppm of nominal value
• Transfer Accuracy... ± (1 ppm + 0.1uΩ at parallel value) for 10:1 & 100:1 ratios
• Long Term Accuracy... ± 10 ppm/year
• Calibration Accuracy... ± 5 ppm

HATS-Y Series High Resistance Transfer Standard

• Resistance Values 100 kΩ, 1 MΩ, 10 MΩ, 100 MΩ
• Initial Accuracy...As good as 10 ppm nominal value matched within 10 ppm
• Transfer Accuracy... ± 2 ppm (Typical Short-term Repeatability)
• 1 Year Stability : As good as 10 ppm

LOM-530 Micro-Ohmmeter Calibration Kit

• Complete set of (5) working standard resistors for calibration of micro-ohmmeters. 
• Resistance values can be custom modified per your requirement.
• Calibrates a wide verity of micro-ohmmeters from various manufacturers

VRS-100 Series High Resistance Standards

• Set of nine, ten or eleven resistors - 1 kΩ, 10 kΩ, 100 kΩ,1 MΩ, 10 MΩ, 100 MΩ, 1 GΩ, 10 GΩ, 100 GΩ, 1 TΩ and 10 TΩ , open circuit (Depending on model)
• High Accuracy - up to 20 ppm
• Standard voltage: up to 5 kV (voltages of 10 kV are available)
• Excellent for Meggers

RTD Series - Precision RTD Simulator

• Highest accuracy, highest stability, lowest TC of any RTD Simulator available
• Accuracy for Z Series: 0.005% (0.012 ºC for PT 100)
• Resolution: 1 mΩ (0.0025 ºC for PT 100)
• Stability 0.0002% for 24 hours; 0.0001% for 12 months

esi SR1 Standard Resistor

• New Design, With Improved Specifications
• Versatile working standard
• Laboratory standard of high accuracy and stability
• Adjusted to within 20 ppm of nominal
• 50 ppm long-term accuracy for most values

DCCS DC Current Shunt Series

• Allows for High Current Calibration, up to 60 A
• Resistances ranges from 100 µΩ - 1 kΩ
• High Accuracy 0.02%
• Suitable for Direct Current & Technical Frequencies
• Oil-Filled Design Ensures Great Long Term Stability <0.01% Over Many Years

GenRad 1620 Capacitance Bridge

• 10^-5pF to 11.1 µF, 2-or 3-terminal
• frequency range 20 Hz -20 kHz (or higher)
• 0.01% accuracy, 1-ppm resolution
• reads dissipation factor or conductance
• combines GenRad 1615 Capacitance Bridge, 1232-A Null Detector & 1311-A Oscillator