Scrolling Catalog

Items 61 to 71 of 71 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Set Descending Direction
  1. Rackmount Shelf

    RM Series General Purpose Test Equipment Rack Mount Shelves

    • Fits standard 19" rack mount cabinets, built to EIA-310-D
    • Available in standard rack mount heights
    • Capable of supporting most electrical instruments of up to 150 pounds
    • Ventilation holes on the bottom allow for instrument cooling
    • Velcro strips are included to help secure instruments on the shelf
    • Mounting hardware available upon request
  2. BP-1000 Family

    BP-1000 Binding Posts Series- Low emf, Rugged, High-Current

    • Very high current rating: 30 amps
    • Lowest impedance of any binding posts <50 μΩ
    • Rugged design
    • Caps resistant to fracture
    • Very low thermal emf
    • Gold-plated tellurium copper body
    • Polycarbonate insulators
  3. SR-1050 Transfer Standard

    esi SR1050 Series 1M & 10 M Resistance Transfer Standard

    • Resistance Values 1 MΩ & 10 MΩ
    • Initial Accuracy... ± 25 or 30 ppm of nominal value matched within 10 ppm
    • Transfer Accuracy... ± 2 ppm (Typical Short-term Repeatability)
    • Calibration Accuracy... ± 10 or 15 ppm
  4. Resistance Transfer Standard

    esi SR1030 Series Oil Immersed Transfer Standard

    • Resistance Values of 1 Ω - 100 kΩ
    • Initial Accuracy... ± 20 PPM of nominal value matched within 10 PPM
    • Transfer Accuracy... ± (1 PPM + 0.1uΩ at parallel value) for 100:1
    • Long Term Accuracy... ± 50 PPM of nominal value
    • Calibration Accuracy... ± 10 PPM
  5. esi SR102, SR103, SR104

    SR102/103/104 Series

    • Highest accuracy (1 ppm/yr) and stability (±0.5 ppm/yr typical) of any resistance standard
    • Lowest temperature coefficients (< 0.1 ppm/ºC)
    • Available in 3 models: 100Ω, 1000 Ω, 10,000Ω.
    • Has remained the foremost resistance standard, with no equivalent, for over 35 years
    • 5 Year Warranty Included
  6. SRX 4-Terminal

    SRX/SRC Series Economical Resistance Standard

    • Wide range of values - 1 mΩ to 10 TΩ
    • Very stable - up to 10 ppm/yr
    • ISO-17025 Accredited Calibration Included
    • 3 Year Warranty Included
    • Excellent TC - as low as 1 ppm/°C
  7. SR1010 Resistance Transfer Standard

    esi SR1010 Resistance Transfer Standard

    • Resistance Transfer Standards available in the following values 1 Ω, 10 Ω, 100 Ω, 1 kΩ, 10 kΩ, 100 kΩ
    • Initial Accuracy... ± 20PPM of nominal value matched within 10PPM
    • Transfer Accuracy... ± (1PPM + 0.1uΩ at parallel value) for 100:1
    • Transfer Accuracy... ± (1PPM + 1uΩ at series parallel value) for 10:1
    • Long Term Accuracy... ± 50PPM of nominal value
    • Calibration Accuracy... ± 10PPM
  8. GenRad 1408 Series Standard Capacitors

    GenRad 1408 Series Standard Capacitors

    • Ultra-high Stability Capacitor
    • 1 pF, 10 pF, and 100 pF
  9. RCS Series Resistance & Capacitance Box

    RCS Series Resistance & Capacitance Box

    • Combination of Resistance and Capacitance Deacade Box
    • Accurate 0.1% to 4% (Depending on Model)
    • Capacitance Range 100 pF - 100 µF
    • Resistance Range 1 Ω - 10 MΩ
    • Compact, convenient, and rugged
  10. Handheld LCR Meter

    DE-6000 Handheld LCR Meter (Discontinued)

    • 0.2% Accuracy up to 33% Improvement from discontinued DE-5000
    • Wide range of test frequencies: 100 Hz / 120 Hz / 1 kHz / 10 kHz / 100 kHz
    • Measure: Resistance, Capacitance, Inductance, D,Q & Phase
    • USB interface for Data Storage of LCR Results   (optional); NEW LabVIEW Driver
    • Allows for 4-Wire Kelvin Measurement to factor out impedance of test leads
  11. GR 1538 Stroboscope

    GenRad 1538-A Stroboscope

    • The highest flashing rates for a stroboscope-up to 150,000 Flashes per mn,
    • Flash duration from 0.5 μs to 3.0 μs for clear, crisp images.
    • Accessory energy-storage capacitor 1538-P4 for very short single flashes.
    • High accuracy stroboscope — rpm measurements can be made to ± 1%

Items 61 to 71 of 71 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Set Descending Direction