Capacitance

Items 1 to 15 of 21 total

per page
Page:
  1. 1
  2. 2

Set Descending Direction
  1. CS Box

    CS Series Cost Effective Capacitance Decade Box

    • Accurate 0.5% to 4%
    • Wide range from 50 pF - 1000 µF (depending on model)
    • Resolutions as good as 1 pF (depending on model)
    • Broad choice of standard and optional models with many powerful features
    • Compact, convenient, and rugged
  2. High Frequency Standard Capacitor

    GenRad 1403 Series High Frequency Standard Capacitor

    • Available in values from 0.001 pF - 1000 pF
    • Excellent Performance at high frequencies
    • ISO-17025 Accredited Calibration Included with the Standard
  3. GenRad 1404 Series Primary Standard Capacitors

    GenRad 1404 Series Primary Standard Capacitors

    • New 5 nF and 10 nF Standards Available
    • A national laboratory standard
    • For calibrating working standards
    • Standard for dissipation factor
    • Available in 10 pF, 100 pF,1000 pF, 10,000 pF
    • 5 Year Warranty Included 
  4. GenRad 1408 Series Standard Capacitors

    GenRad 1408 Series Standard Capacitors

    • Ultra-high Stability Capacitor
    • 1 pF, 10 pF, and 100 pF
  5. 1409 Standard Capacitor

    GenRad 1409 Series Standard Capacitor

    • Values 0.001 µF (100 nF)  to 1000 µF
    • Stability as good as ±0.01 %/year
    • Two-to-five terminal configuration, depending on model
    • Calibration accredited to ISO-17025 included
    • 3 year warranty included
  6. GenRad 1412-BC Decade Capacitance Box

    GenRad 1412-BC Decade Capacitance Box

    • Range from 50 pF to 1.11115 µF
    • Resolution better than 1 pF
    • Accuracy 0.5% + 5 pF
    • Low loss, leakage, dielectric absorption
    • Verification of calibration of LCR meters, multimeters, and instrumentation
  7. GenRad/IET 1413 Decade Capacitor

    Genrad 1413 Precision Decade Capacitor

    • Range from 1 pF to 1.11111 µF
    • High accuracy of 0.05% + 0.5 pF
    • Excellent Stability 100 ppm per year
    • The trusted lab standard for capacitance
    • 3-Terminal shielded construction
  8. 1417 Capacitance Standard

    GenRad 1417 Capacitance Standard 1 uF - 1 F

    • 7 Switch-Selected Standard Capacitance Values: 1 µF, 10 µF, 100 µF, 1 mF, 10 mF,100 mF, 1 F
    • 3 Switch-Selected Test Frequencies: 100 Hz,
      120 Hz, 1 kHz
    • 0.25% direct-reading capacitance accuracy
    • 0.1% or better ratio accuracy
  9. 1412-B Decade Capacitor

    GenRad 1419 Series Decade Capacitor

    • Range from 100 pF to 1.1 µF
    • Choice of 3 models
    • Accuracy as good as 0.5%
    • Capacitance and dissipation factor vary only slightly with frequency from dc through the audio frequency range.
  10. 1422-CB 3-Terminal Air Capacitor

    GenRad 1422 Series Variable Air Capacitors

    • Range as low as 0.002 pF and as high as 1150 pF (Depending on Model)
    • Stability: better than 0.02% full scale per year
    • Settable to 40 ppm
    • Low temperature coefficient, low losses
    • Wide selection to suit needs
  11. GenRad 1423-A Decade Capacitor

    GenRad 1423-A Decade Capacitor

    • Range 100pF - 1.111 µF
    • ±0.05% accuracy
    • two- or three-terminal connection
  12. 1620 Capacitance Measuring System

    GenRad 1620 Capacitance Bridge

    • 10-5pF to 11.1 µF, 2-or 3-terminal
    • frequency range 20 Hz -20 kHz (or higher)
    • 0.01% accuracy, 1-ppm resolution
    • reads dissipation factor or conductance
    • combines GenRad 1615 Capacitance Bridge, 1232-A Null Detector & 1311-A Oscillator
  13. IET 1621 Precision Capacitance Bridge

    GenRad 1621 Capacitance Bridge

    • Range 10-7 pF to 10 µF, 12-digit readout
    • 10-ppm basic accuracy
    • frequency range 10 Hz - 100 kHz
    • combines GenRad 1616 Capacitance Bridge, 1238-A Null Detector & 1316 Oscillator
  14. GenRad 1659 Digibridge

    GenRad 1659 Digibridge

    • 0.1% Measurement Accuracy
    • 4 Test Frequencies 100Hz to 10kHz
    • 5 Impedance Parameters
    • Built-in Test Fixture
  15. 1689-9700 Precision Impedance Meter

    GenRad 1689 Precision Impedance Meter

    • The world's standard for AC Resistance, Low Frequency Inductance and Capacitance measurement
    • 0.02% Measurement Accuracy and +/- 0.0001 Df
    • Programmable Frequency 12 Hz - 100 kHz
    • Widely accepted impedance meter in a metrology environment
    • 1689 has a built-in 4 terminal kelvin fixture for testing axial and radial components
    • 1689M has four BNC connectors for use with a wide variety of standard accessories

Items 1 to 15 of 21 total

per page
Page:
  1. 1
  2. 2

Set Descending Direction