Resistance

Filter Ideal Instrument
  1. HRRS-5 kV & 10 kV Series - High Resistance Decade Box
    • Resistance from 10 Ω to 11 TΩ
    • High-accuracy: up to .01%; 3 Accuracy Classes
    • Max voltage of 5 kV or 10 kV; 2 Series
    • Ideal for the calibration of meggers
  2. SR102/103/104 Series
    • Highest accuracy (1 ppm/yr) and stability (±0.5 ppm/yr typical) of any resistance standard
    • Lowest temperature coefficients (< 0.1 ppm/ºC)
    • Available in 3 models: 100Ω, 1000 Ω, 10,000Ω.
    • Has remained the foremost resistance standard, with no equivalent, for over 35 years
    • 5 Year Warranty Included
  3. PRS-330 Precision Programmable Resistance Box & RTD Simulator
    • Resistance range: 0.1 Ω to 20 MΩ with a Resolution of 1 μΩ or 6 digits
    • Lab grade accuracy (70 ppm + 1 mΩ): 1.5 times better than conventual manual decade resistors
    • Manual or Programmable resistor with USB, Ethernet and IEEE interfaces all standard
    • Very low long term mantaince cost- with an 5 year warranty
    • About 10% lower in cost to the PRS-370
    • If you own 8.5 Digit DMM (Fluke 8508A or Keysight 3458A) you should strongly consider the PRS-370
  4. esi SR1050 Series 1M & 10 M Resistance Transfer Standard
    • Resistance Values 1 MΩ & 10 MΩ
    • Initial Accuracy... ± 25 or 30 ppm of nominal value matched within 10 ppm
    • Transfer Accuracy... ± 2 ppm (Typical Short-term Repeatability)
    • Calibration Accuracy... ± 10 or 15 ppm
  5. PRS-370 Self-Adjusting Programmable Resistance Box & RTD Simulator
    • Resistance range: 0.1 Ω to 20 MΩ with a Resolution of 1 μΩ or 6 digits
    • Precision lab grade Resistor Standard with accuracy <10 ppm when used in DMM mode or <70 ppm accuracy in source mode.
    • Manual or Programmable decade resistor with IEEE interface and Labview drivers
    • No long term maintenance or calibration cost -with an 5 year warranty
    • Designed for customers who own an 8.5 digit DMM (Fluke 8508A or Keysight 3458)
    • The most revolutionary decade resistor ever!

5 Items

per page
Set Descending Direction