- A 10 pF national laboratory standard
- A national laboratory standard
- For calibrating working standards
- Standard for dissipation factor
- Also available in 10 pF, 100 pF,1000 pF, 10,000 pF
- 20 ppm/year stability, history has shown this to be a very conservative specification
- Hermetically sealed in dry nitrogen
- ISO-17025 Accredited Calibration Included
- 5 Year Warranty Included
The GenRad 1404-C 10 pF standard capacitor are the standard of choice in metrology labs, and still used today by standards bodies around the world. These
capacitors have been designed as primary reference standards of capacitance with
which working standards can be compared.
In combination with an accurately known external resistor, the GenRad 1404-C 10 pF standard capacitor standard capacitors becomes a standard of dissipation factor
All critical parts of the plate assembly are made of Invar for stability and low temperature coefficient. After heat cycling and adjustment, the assembly is mounted in a heavy brass container, which, after evacuation, is filled with dry nitrogen under pressure slightly above atmospheric and sealed. The container is mounted on an aluminum panel and protected by an outer aluminum case. Each capacitor is subjected to a series of temperature cycles to determine hysteresis and temperature coefficients and to stabilize the capacitance
OTHER 1404 MODELS
GenRad / General Radio 1404-10nF (10.000 pF) Recently Released
GenRad / General Radio 1404-A (1000 pF) Primary Standard Capacitor
GenRad / General Radio 1404-B (100 pF) Primary Standard Capacitor
GenRad / General Radio 1404-C (10 pF) Primary Standard Capacitor
Calibration: A certificate of calibration that is accredited to ISO-17025 by A2LA is supplied with each capacitor, giving the measured direct capacitance at 1 kHz and 23° ±1°C. The measured value is obtained by a comparison to a precision better than ±1 ppm with working standards whose absolute values are known to an accuracy of ±5 ppm, determined and maintained in terms of reference standards periodically measured by the National Institute of Standards and Technology.
Adjustment Accuracy: The capacitance is adjusted before calibration with an accuracy of ±5 ppm to a capacitance about 5 ppm above the nominal value relative to the capacitance unit maintained by the reference standards.
Stability: Long term drift is less than 20 ppm per year. Maximum change with orientation is 10 ppm and is completely reversible.
Temperature Coefficient of Capacitance: 2 ±2 ppm/°C for 1404-A and -B, 5 ±2 ppm/°C for 1404-C, from -20°C to +65°C. A measured value with and accuracy of ±1 ppm/°C is given on the certificate.
Temperature Cycling: For temperature cycling over range from -20°C to +65°C , hysteresis (retraceable) is less than 20 ppm at 23°C.
Dissipation Factor: Less than 10-5 at 1 kHz.
Residual Impedance: See Figure 1 on datasheet for typical values of internal series inductance and terminal capacitance.
Max Voltage: 750 V.
Terminals: Two BNC coaxial connectors (legacy locking G874 coaxial connectors are available). Outer shell of one connector is ungrounded to permit capacitor to be used with external resistor as a dissipation factor standard.
Mechanical: Lab-bench cabinet.
Dimensions: 16.9 cm H x 17.2 cm W x 20.4 cm D (6.63" x 6.75" x 8").
Weight: 3.9 kg (8.5 lb.) net, 6.4 kg (14 lb.) shipping.