- Invaluable tool in verifying the operation of any rigid dielectric cell such as the LD-3 and LD-3T
- Simple way to check that dielectric constant measurements are correct
- Can be used with LD-3 and LD-3T
The TS-100 Teflon Standard is an invaluable tool in verifying the operation of any rigid dielectric cell such as the LD-3 and LD-3T.
The TS-100 consists of a 3 inch (7.5 cm) diameter and 0.235 inch (5 mm) thick Teflon standard.
The Teflon Standard is calibrated using a IET 1620A Capacitance Bridge at 70° F at 1 kHz. The Teflon Standard will have a nominal dielectric constant of 2.04.
Wood case not included.
Size Nominal: 3” OD x 0.235”
Flatness: within 100 millionths of an inch
K Nominal: 2.04
Calibration: Calibrated value using LD-3 Cell and IET 1620A at 1kHz, 70° F.