PRS-300 Precision Programmable Resistance Decade
Double click on above image to view full picture
Photo represents example of series. See datasheet for more details on any specific model.
- Resistance Range: 0.1 Ω to 20 MΩ
- Precision Lab Grade Accuracy 70 ppm + 1 mΩ Resolution: 1 μΩ ( 0.000 001 Ω)
- To further improve accuracy to <20 ppm, for no additional cost, see the PRS-DMM
- Programmable Decade Resistor with USB Interface and Labview Drivers
- 5 Year Warranty
- Virtually no maintenance cost, very simple to calibrate
- High reliability relays, rated for 100 Million Switches
- With Built-in PT-100 and PT-1000 Tables, RTD values can be inputted in both °C, °F or Ω
- Built-in EIA "preferred value" resistance tables
- No Zero or Switch Resistance
- 5-way low emf binding posts
Estimated Delivery is 2 to 4 weeks
The PRS-300 was designed with the right mix of features for to be efficient for both manual and automated application in both laboratory and production environments. With its wide range the PRS-300 was designed to replace multiple decade boxes and reduce test time.
With its industry leading 5 year warranty all aspects of the PRS-300 focus on reliability, reduced ownership costs and simplicity out of the box.
The simple user interface makes PRS-300 well suited for high accuracy requirements for both manual and automated applications such as RTD simulation, DMM calibration, circuit trimming, and load testing.
Further Improve On Accuracy to <15 ppm
Additionally, if you own an 8.5 digit DMM like Fluke 8508A or the Keysight 3458A, for no additional cost, the PRS-300 can be used as part of the PRS-DMM system which will further improve on the accuracy of the unit to <15 ppm.
Interface and Drivers
Operation is both local using a convenient numeric keypad and up/down arrow keys or remote control with standard USB and optional Ethernet, and IEEE-488 interfaces.
Highest Quality Components
The programmable decade box employs, high-quality gold-plated tellurium-copper five-way binding posts serve to minimize the thermal emf effects, which would produce errors in dc resistance measurements.
Built-in tables for PT100 and PT1000 RTDs and direct resistance substitution makes the PRS-300 ideal for for RTD (Resistance Temperature Detector) simulation. User defined tables can also be created for use with other RTDs. The operator can enter temperature directly and the correct resistance will automatically be programmed.
Built-in EIA "preferred value" resistance tables of 1% (E96), 5% (E24), 10% (E12) increments or user specified increment allows the PRS-300 to be used as a resistor carousel.
The PRS-300 programmable resistance decade box is a precision resistance source with excellent characteristics of stability, temperature coefficient, and power coefficient. The use of low inductance wirewound and Z-foil resistors allows the PRS-300 to be used in ac applications with minimal resistance change from dc below 1 kHz.
No Zero Resistance
The PRS Series programmable resistance decade box employs very low resistance, low thermal emf relays with gold-clad silver-alloy contacts. A special design keeps contact resistance to a minimum. The gold plating keeps the silver contacts from becoming tarnished when unused, or when only low currents are passed through them. This is most often the case when only minute test currents are drawn by digital multimeters and other test instruments. Contact resistance remains low and repeatable through the use of multiple contacts.
Optional Rack Mounting
The PRS Series programmable resistance decade box may be rack mounted to serve as components in measurement and control systems.
Optional Ethernet Interface
For Ethernet interface:
Unzip the file and follow instructions to install. The application allows the user to change IP address and communicate with the PRS. Please see PRS-300 instruction manual for more information.
BASIC SPECIFICATIONS(See datasheet for full specifications)
Would you like to proceed with your quote, or continue to add products to your quote cart?