Capacitance

  1. CS Series Cost Effective Capacitance Decade Box
    • Accurate 0.5% to 4%
    • Wide range from 50 pF - 1000 µF (depending on model)
    • Resolutions as good as 1 pF (depending on model)
    • Broad choice of standard and optional models with many powerful features
    • Compact, convenient, and rugged
  2. GenRad 1403 Series High Frequency Standard Capacitor
    • Available in values from 0.001 pF - 1000 pF
    • Excellent performance at high frequencies
    • ISO-17025 accredited calibration included with the standard
  3. GenRad 1404 Series Primary Standard Capacitors
    • Available in 10 pF, 100 pF,1000 pF, 5000 pF 10,000 pF
    • 20 ppm/year stability, history has shown this to be a very conservative specification
    • The national laboratory standard for capacitance
    • For calibrating highest level standards
    • Standard for dissipation factor
    • 5 year warranty included 
  4. GenRad 1408 Series Standard Capacitors
    • Ultra-high Stability Capacitor
    • 1 pF, 10 pF, and 100 pF
  5. GenRad 1409 Series Standard Capacitor
    • Values 0.001 µF (100 nF)  to 1000 µF
    • Stability as good as ±0.01 %/year
    • Two-to-five terminal configuration, depending on model
    • Calibration accredited to ISO-17025 included
    • 3 year warranty included
  6. GenRad 1412-BC Decade Capacitance Box
    • Range from 50 pF to 1.11115 µF
    • Resolution better than 1 pF
    • Accuracy 0.5% + 5 pF
    • Low loss, leakage, dielectric absorption
    • Verification of calibration of LCR meters, multimeters, and instrumentation
  7. Genrad 1413 Precision Decade Capacitor
    • Range from 1 pF to 1.11111 µF
    • High accuracy of 0.05% + 0.5 pF
    • Excellent Stability 100 ppm per year
    • The trusted lab standard for capacitance
    • 3-Terminal shielded construction
  8. GenRad 1417 Capacitance Standard 1 uF - 1 F
    • 7 Switch-Selected Standard Capacitance Values: 1 µF, 10 µF, 100 µF, 1 mF, 10 mF,100 mF, 1 F
    • 3 Switch-Selected Test Frequencies: 100 Hz,
      120 Hz, 1 kHz
    • 0.25% direct-reading capacitance accuracy
    • 0.1% or better ratio accuracy
  9. GenRad 1419 Series Decade Capacitor
    • Range from 100 pF to 1.1 µF
    • Choice of 3 models
    • Accuracy as good as 0.5%
    • Capacitance and dissipation factor vary only slightly with frequency from dc through the audio frequency range.
  10. GenRad 1422 Series Variable Air Capacitors
    • Range as low as 0.002 pF and as high as 1150 pF (Depending on Model)
    • Stability: better than 0.02% full scale per year
    • Settable to 40 ppm
    • Low temperature coefficient, low losses
    • Wide selection to suit needs
  11. GenRad 1423-A Decade Capacitor
    • Range 100pF - 1.111 µF
    • ±0.05% accuracy
    • two- or three-terminal connection
  12. GenRad 1620 Capacitance Bridge
    • 10-5pF to 11.1 µF, 2-or 3-terminal
    • frequency range 20 Hz -20 kHz (or higher)
    • 0.01% accuracy, 1-ppm resolution
    • reads dissipation factor or conductance
    • combines GenRad 1615 Capacitance Bridge, 1232-A Null Detector & 1311-A Oscillator
  13. GenRad 1621 Capacitance Bridge
    • Range 10-7 pF to 10 µF, 12-digit readout
    • 10-ppm basic accuracy
    • frequency range 10 Hz - 100 kHz
    • combines GenRad 1616 Capacitance Bridge, 1238-A Null Detector & 1316 Oscillator
  14. GenRad 1659 Digibridge
    • 0.1% measurement accuracy
    • 4 test frequencies 100 Hz to 10 kHz
    • 5 impedance parameters
    • Built-in test fixture
  15. GenRad 1689 Precision Impedance Meter
    • The world's standard for AC resistance, low frequency inductance and Capacitance measurement
    • 0.02% Measurement Accuracy and +/- 0.0001 Df
    • Programmable Frequency 12 Hz - 100 kHz
    • Widely accepted impedance meter in a metrology environment
    • 1689 has a built-in 4 terminal kelvin fixture for testing axial and radial components
    • 1689M has four BNC connectors for use with a wide variety of standard accessories
  16. GenRad 1692 Benchtop LCR Meter
    • 0.05% measurement accuracy
    • 5 test frequencies 100 Hz to 100 kHz
    • 5 impedance parameters
    • Built-in test fixture
  17. GenRad 1693 Precision LCR Meter
    • The world's standard for ac resistance, low frequency inductance and capacitance measurement in a metrology environment
    • 0.02% measurement accuracy and +/- 0.0001 Df
    • Programmable frequency 12 Hz - 200 kHz
    • Extremely reliable can last up to 30+ years
  18. HACS-Z Series High Accuracy Decade Capacitance Box
    • Range from 1 pF to 11,111 µF
    • High accuracy of 0.05% + 0.5 pF
    • Units available with as few as 3 and as many as 11 decades
    • Excellent Stability 100 ppm per year
    • 3-Terminal shielded construction
  19. IET/QuadTech 1910/1920 1 MHz LCR Meter
    • 20 Hz to 1 MHz frequency range 27,000 possible frequency options
    • 0.1% basic measurement accuracy
    • Measures 15 impedance parameters, dc resistance, voltage and current
    • IEEE-488.2,RS-232, handler, and serial printer interfaces all standard
    • Wide measurement range with 5 digit measurement resolution
    • Four-terminal Kelvin connections to maintain measurement integrity
  20. IET/QuadTech 7600 Plus Precision LCR Meter
    • Measures 14 impedance parameters (2 simultaneously)
    • 0.05% basic measurement accuracy
    • Programmable frequencies from 10 Hz to 2 MHz
    • AC test voltage programmable from 20 mV to 5 V
    • DC bias voltage, 2 V internal or 0 to 200 V external
    • Fast measurement speeds up to 120/second
    • Automatic open/short zeroing eliminates connection errors
    • High resolution LCD with 7 digit display
    • 14 Hi/Lo sorting bins for pass/fail testing
  21. PCS Series Programmable Capacitance Decade Box
    • The world's only programmable capacitance decade box
    • Wide range and resolution: 1 pF to 100 µF
    • Available at accuracies of : 0.5%, 1% and 4%
    • LabVIEW Drivers for IEEE-488.2 and RS-232 Versions
    • Dual / Combo rackmount models ( examples:Resistance & Capacitance )
  22. RCS Series Resistance & Capacitance Box
    • Combination of resistance and capacitance decades
    • Accurate 0.1% to 4% (depending on model)
    • Capacitance range 100 pF - 100 µF
    • Resistance range 1 Ω - 10 MΩ
    • Compact, convenient, and rugged
  23. SCA Series Capacitance Standard
    • Values from 1 pF to 10,000 µF in any custom value available
    • Stability as good as ±0.01 %/year
    • Two-to-five terminal configuration, depending on model
    • Excellent TC: as low as 10 ppm/°C
    • 3 year warranty included

23 Items

per page
Set Descending Direction