Decade Boxes

  1. RS Series Resistance Substitution Box
    • Accurate 0.1% to 1%
    • Wide range from 0.01 Ω - 100 MΩ (Depending on Model)
    • Broad choice of standard and optional models with many powerful features
    • Compact, convenient, and rugged
  2. PRS-300 Precision Programmable Resistance Decade
    • Resistance Range: 0.1 Ω to 20 MΩ
    • Precision lab grade accuracy 70 ppm + 1 mΩ
    • Resolution: 1 μΩ ( 0.000 001 Ω) or 6 digits
    • To further improve accuracy to PRS-DMM
    • Programmable decade resistor with USB interface and Labview drivers
    • 5 year warranty
  3. PRS-DMM Programmable Self-Adjusting Resistance Standard
    • Patent pending
    • Software leverages the accuracy of an 8.5 digit DMM, with the versatility of the PRS-300 Programmable Resistor to make the most revolutionary standard resistor ever manufactured
    • Resistance Range: 0.1 Ω to 20 MΩ
    • Resolution: 1 μΩ
    • Accuracies better than 20 ppm; source resistance with the same accuracy that your 8.5 Digit DMM can measure.
    • All you need to do is enter the target resistance. The software uses the DMM to measure the resistance being sourced by the PRS-300 and readjusts the source resistance as close as possible to the target resistance.
    • Software automatically provides the measurement uncertainties of every measurement
  4. HARS Series Resistance Decade Box
    • Resistance from 1 mΩ to 111 MΩ
    • Available in double-power version: HARS-X2
    • Wide choice: single through 11 decade units
    • High accuracy - 0.01% (100 ppm) or 0.1% depending on model
  5. CS Series Cost Effective Capacitance Decade Box
    • Accurate 0.5% to 4%
    • Wide range from 50 pF - 1000 µF (depending on model)
    • Resolutions as good as 1 pF (depending on model)
    • Broad choice of standard and optional models with many powerful features
    • Compact, convenient, and rugged
  6. Genrad 1413 Precision Decade Capacitor
    • Range from 1 pF to 1.11111 µF
    • High accuracy of 0.05% + 0.5 pF
    • Excellent Stability 100 ppm per year
    • The trusted lab standard for capacitance
    • 3-Terminal shielded construction
  7. PRS Series Programmable Resistance Decade Box
    • IEEE, RS232 or Ethernet Programmable Decade Resistor
    • Wide range and resolution: 1 mΩ to 100 MΩ
    • Available at accuracies of : 0.01%, 0.02%, 0.05%, 0.1%, 0.5%, and 1%
    • Special RTD and custom configurations
    • Dual / Combo rackmount models ( examples: resistance & capacitance )
    • Consider NEW PRS-300 Decade Resistor
  8. LS Series Inductance Decade Box
    • Accurate 2%
    • Cost effective for lab or educational uses
    • Wide range from 1 µH - 10 H
    • Broad choice of 3 standard models, the LS-400, LS-400A, LS-400L
    • Compact, convenient, and rugged
    • Manufactured in the United States
  9. GenRad 1491 D, G Precision Decade Inductor
    • Most accurate decade inductor commercially available, accuracy's as good as 0.8%
    • Inductance range from 1 mH or 100 µH to 11 H
    • Shielded toroidal cores for small mutual inductance and minimal effect from external fields
    • Sealed against moisture for long-term stability
  10. PLS Series Programmable Inductance Decade Box
    • Wide range and resolution: 1 µH to 10 H
    • Available at accuracies of : 1% and 2%
    • LabVIEW Drivers for IEEE-488.2 and RS-232 Versions
    • Programmable "open circuit" and "short circuit" states optional
    • Desktop and 19" Rackmount enclosures
  11. Custom_Decades
    • Custom Resistance Decade Boxes
    • Custom Resistors
    • IET will design a custom resistance decade to meet or exceed your requirement
  12. HACS-Z Series High Accuracy Decade Capacitance Box
    • Range from 1 pF to 11,111 µF
    • High accuracy of 0.05% + 0.5 pF
    • Units available with as few as 3 and as many as 11 decades
    • Excellent Stability 100 ppm per year
    • 3-Terminal shielded construction
  13. PCS Series Programmable Capacitance Decade Box
    • The world's only programmable capacitance decade box
    • Wide range and resolution: 1 pF to 100 µF
    • Available at accuracies of : 0.5%, 1% and 4%
    • LabVIEW Drivers for IEEE-488.2 and RS-232 Versions
    • Dual / Combo rackmount models ( examples:Resistance & Capacitance )
  14. GenRad 1417 Capacitance Standard 1 uF - 1 F
    • 7 Switch-Selected Standard Capacitance Values: 1 µF, 10 µF, 100 µF, 1 mF, 10 mF,100 mF, 1 F
    • 3 Switch-Selected Test Frequencies: 100 Hz,
      120 Hz, 1 kHz
    • 0.25% direct-reading capacitance accuracy
    • 0.1% or better ratio accuracy
  15. GenRad 1412-BC Decade Capacitance Box
    • Range from 50 pF to 1.11115 µF
    • Resolution better than 1 pF
    • Accuracy 0.5% + 5 pF
    • Low loss, leakage, dielectric absorption
    • Verification of calibration of LCR meters, multimeters, and instrumentation
  16. RCS Series Resistance & Capacitance Box
    • Combination of resistance and capacitance decades
    • Accurate 0.1% to 4% (depending on model)
    • Capacitance range 100 pF - 100 µF
    • Resistance range 1 Ω - 10 MΩ
    • Compact, convenient, and rugged
  17. HPRS Series High Power Resistance Decade Box
    • Resistance from 1 mΩ to 10 MΩ
    • Power Rating : 225 W/decade, 250 W max. or higher (contact IET for custom higher power units)
    • Accuracy: 0.5% or 1%
    • Special and custom configurations available
  18. esi RS925D Resistance Decade
    • High accuracy - 20 ppm + 0.5 mΩ
    • High stability - 20 ppm + 0.5 mΩ
    • Resistance from 10 mΩ to 1.1 MΩ
    • 20 μΩ resolution 
    • Precise fixed minimum resistance
  19. HARS-LX Series Decade Resistance Substituter Lab Standard
    • High accuracy - as good as 20 ppm
    • High stability - as good as 5 ppm/yr
    • Over 55 models available with resistance from 1 mΩ to 121.1 MΩ
    • Resolution as good 1 mΩ with a fixed decade or 20 μΩ with a rheostat.
  20. HRRS Series High Resistance Decade Box
    • Resistance from 100 Ω to 100 GΩ
    • High-accuracy: up to .01%, 3 Accuracy Classes Available
    • Voltage up to 2000 V
    • Excellent TC: as low as 5 ppm/°C
  21. esi / Tegam DB62 Decade Resistor
    • Precision accuracy of ±(0.01% + 2 mΩ)
    • Resistance range from 0.01 Ω to 11.1111 MΩ
    • 4 models available, each covering six decades
    • High-performance solid silver-alloy contacts
    • Low zero resistance < 6mΩ
  22. HRRS-5 kV & 10 kV Series - High Resistance Decade Box
    • Resistance from 10 Ω to 11 TΩ
    • High-accuracy: up to .01%; 3 Accuracy Classes
    • Max voltage of 5 kV or 10 kV; 2 Series
    • Ideal for the calibration of meggers
  23. GenRad 1433 Series Decade Resistor
    • Precision accuracy of 0.01%
    • Resistance range from 1 mΩ to 111.11111111 MΩ
    • 36 models available, 3 to 11 dials
    • Long life switches with silver-alloy contacts
  24. VRS-100 Series High Resistance Standards
    • Set of nine, ten or eleven resistors - 1 kΩ, 10 kΩ, 100 kΩ,1 MΩ, 10 MΩ, 100 MΩ, 1 GΩ, 10 GΩ, 100 GΩ, 1 TΩ and 10 TΩ , open circuit (Depending on model)
    • High Accuracy - up to 20 ppm
    • Standard voltage: up to 5 kV (voltages of 10 kV are available)
    • Excellent for calibration of Meggers
  25. OS-260 & OS-270 Resistance Decade Boxes / RTD Simulator
    • The revolutionary ohmSOURCE microprocessor controlled resistor is like nothing you have ever seen before!
    • US Patent 6487456
    • Two cost-effective models available
    • Accuracy's as tight as 0.01%, with resolution as good as 0.01Ω
    • Engineered as an ideal RTD calibrator 

Items 1-25 of 30

Page
per page
Set Descending Direction