- PRS-200 Series Programmable Resistance Decade Box
- IEEE, RS232 or Ethernet Programmable Decade Resistor
- Wide range and resolution: 1 mΩ to 100 MΩ
- Available at accuracies of : 0.01%, 0.02%, 0.05%, 0.1%, 0.5%, and 1%
- Special RTD and custom configurations
- Dual / Combo rackmount models ( examples: Resistance & Capacitance or Resistance & Inductance)
- VRS-100 Series High Resistance Standards
- Set of nine, ten or eleven resistors - 1 kΩ, 10 kΩ, 100 kΩ,1 MΩ, 10 MΩ, 100 MΩ, 1 GΩ, 10 GΩ, 100 GΩ, 1 TΩ and 10 TΩ , open circuit (Depending on model)
- High Accuracy - up to 20 ppm
- Standard voltage: up to 5 kV (voltages of 10 kV are available)
- Excellent for calibration of Meggers
- For higher resistance values above 10 TΩ see SRC-T Network Standards
- HRRS-5 kV & 10 kV Series - High Resistance Decade Box
- Choose from units with a max. resistance of 1 GΩ, 10 GΩ, 10 GΩ, 1TΩ or 11 TΩ
- Units use the most stable and accurate resistors and custom high voltage switches
- Maximum Voltages of 5000 V or 10,000 V. For 2000 V, consider the standard HRRS Series
- Used for calibration of Meggers and sourcing out precision high resistance.
- OS-260 & OS-270 Resistance Decade Boxes / RTD Simulator
- The revolutionary ohmSOURCE microprocessor controlled resistor is like nothing you have ever seen before!
- US Patent 6487456
- Two cost-effective models available
- Accuracy's as tight as 0.01%, with resolution as good as 0.01Ω
- Engineered as an ideal RTD calibrator
- Unit can only be used as a MANUAL unit. Can not be connected to or controlled by a computer