- Effective September 2018, the 1546 has been discontinued
- High flashing rates for a stroboscope-up to 25,000 Fashes per minute, direct reading.
- Flash duration from 1.2 μs to 2 μs for clear, crisp images.
- Lightweight and handheld, very easy to use unit with digital readout
Effective September 2018, the 1546 has been discontinued
IET Labs will continue to repair and calibrate the 1546 for the foreseeable future.
Please see the 1538 Stroboscope as a replacement
The GenRad 1546 digital stroboscope emits a high-intensity, short-duration flash of light. The stroboscope features an electronic pulse generator that controls the flash rate, a line-operated power supply, and a light-emitting diode (LED) five digit readout in flashes per minute. The instrument has internally and externally triggered modes of operation. In the Internal mode, the stroboscopes flash is triggered by an internal oscillator pulse which can also drive other IET stroboscopes for additional light sources. In the External mode, the 1546 operates as a digital tachometer
The 1546 digital stroboscope, weighing 1.25 kg (2.75 lb), is sufficiently light in weight to permit convenient hand-held operation. Thus, the light can be aimed at most moving objects, including those in otherwise inaccessible areas. The instrument is contained in a high-impact, injection-molded plastic housing. The strobe can be held in the operator’s hands, placed on any convenient flat surface, or mounted on a tripod.
The 1546 digital stroboscope is particularly suited to speed measurements because of the instant digital readout. In machinery design and maintenance applications, the stroboscope will help determine the speed of rotating components, slippage between shafts, condition of belts and gears, alignment of couplings, and effect of chassis vibration, all at operating speed. It is very useful for quality control inspection and set-up of process machinery such as bottling, canning, packaging, and stamping operations. Other ideal applications of the stroboscope are textile machinery adjustments, printing press registration, electrical equipment design and servicing, photography of high speed events, and physics lab demonstrations. The 1546 is designed for maximum portability and particularly suited to speed measurements. This stroboscope is great for machinery design and maintenance applications along with quality control inspection and others.
Flashing Rate Range: 100 to 25,000 flashes per minute (fpm) in three overlapping ranges;
Range 1 LOW 100 - 700 fpm
Range 2 MED 600 - 4,200 fpm
Range 3 HIGH 3,600 - 25,000 fpm
Readout Accuracy: ±0.01%, using crystal-controlled time base.
Display Resolution: ±1 fpm.
Flash Duration: Range 1 ~ 2 μS, Range 2 ~ 2 μs, Range 3 ~ 1.2 μs
Tachometer Function: LED display reads fpm for both internal and external modes. User may convert to other units of measure if required.
External Trigger: Three-terminal phone jack, >+1.0 V pulse, >0.75 Vrms sine wave, or contact closure Trigger Output: >2.5 V in series with 1 kΩ.
Power Requirements: 105 to 125 Vac, 50 to 60 Hz, 20 W.
Dimensions: 108 x 110 x 235 mm (4.25 x 4.3 x 9.25 in.) Weight: 1.25 kg (2.75 Ib.).