Scrolling Catalog

GenRad 1693 Precision LCR Meter

• The world's standard for AC Resistance, Low Frequency Inductance and Capacitance measurement in a metrology environment
• 0.02% Measurement Accuracy and +/- 0.0001 Df
• Programmable Frequency 12 Hz - 200 kHz
• Extremely Reliable can last up to 30+ years

1865+ Digital Megohmmeter I/R Tester

• Measurements from 1kΩ to 100TΩ, with Auto Ranging
• 0.5% measurement accuracy
• Improved High-visibility blue LCD graphical display for Menu Programming and Test Results
• Programmable Test Voltage from 1 to 1000VDC
• Fully Programmable Measure Cycle Times
• Automatic Test Lead Zeroing To Eliminate Connection Errors
• Direct Reading of Measured Resistance or Current

HACS-Z Series High Accuracy Decade Capacitance Box

• Range from 1 pF to 11,111 µF
• High accuracy of 0.05% + 0.5 pF
• Units available with as few as 3 and as many as 11 decades
• Excellent Stability 100 ppm per year
• 3-Terminal shielded construction

GenRad 1482 Series Inductance Standard

• Stable within ±0.01% per year
• 18 Models values from 1 µH to 10 H
• Low, known temperature coefficient
• 3 year warranty included

GenRad 1689 Precision Impedance Meter

• The world's standard for AC Resistance, Low Frequency Inductance and Capacitance measurement
• 0.02% Measurement Accuracy and +/- 0.0001 Df
• Programmable Frequency 12 Hz - 100 kHz
• Widely accepted impedance meter in a metrology environment
• 1689 has a built-in 4 terminal kelvin fixture for testing axial and radial components
• 1689M has four BNC connectors for use with a wide variety of standard accessories

GenRad 1531-AB Stroboscope

• High flashing rates up to 25,000 per minute — speed measurements to 250.000 rpm.
• Short flash duration — "stops" rapid motion and permits ultra-high-speed photography.
• High accuracy stroboscope — rpm measurements can be made to ± 1%.

GenRad 1409 Series Standard Capacitor

PRS Series Programmable Resistance Decade Box

• IEEE or RS232 Programmable Decade Resistor
• Wide range and resolution: 1 mΩ to 100 MΩ
• Available at accuracies of : 0.01%, 0.02%, 0.05%, 0.1%, 0.5%, and 1%
• Special RTD and custom configurations
• Dual / Combo rackmount models ( examples: resistance & capacitance )

VI-700 Precision Voltage & Current Source

• Voltage output range of 100 µV to 20 V or 200 V
• Current output range of 0.1 µA to 20 mA or 200 mA
• 3½ digit resolution, 0.75 LSD accuracy
• Manual thumbwheel operation or programmable digital input, IEEE-488 or RS232 interface
• May be used as a component in a closed loop control system
• Manufactured in the United States

GenRad 1491 D, G Precision Decade Inductor

• Most accurate decade inductor commercially available, accuracy's as good as 0.8%
• Inductance range from 1 mH or 100 µH to 11 H
• Shielded toroidal cores for small mutual inductance and minimal effect from external fields
• Sealed against moisture for long-term stability

SCA Series Capacitance Standard

• Values from 1 pF to 10,000 µF in any custom value available
• Stability as good as ±0.01 %/year
• Two-to-five terminal configuration, depending on model
• Excellent TC: as low as 10 ppm/°C
• 3 year warranty included

GenRad 1404 Series Primary Standard Capacitors

• A national laboratory standard
• For calibrating working standards
• Standard for dissipation factor
• Available in 10 pF, 100 pF,1000 pF, 10,000 pF
• 5 Year Warranty Included 

Genrad 1413 Precision Decade Capacitor

esi DP 1211 & DP 1311 Voltage Dividers

• Kelvin-Varley voltage divider
• Still manufactured to the same specifications as esi/Tegam units
• 4 standard models with resistance values of 1 kΩ & 10 kΩ
• Custom resistance values, like 8 kΩ or 100 kΩ are available
• Precision resistors throughout
• Solid silver-alloy switch contacts