Scrolling Catalog
-
GenRad 1546 Digital Stroboscope
- High flashing rates for a stroboscope-up to 25,000 Fashes per minute, direct reading.
- Flash duration from 1.2 μs to 2 μs for clear, crisp images.
- Lightweight and handheld, very easy to use unit with digital readout
-
GenRad 1840-A Output Power Meter
- Power output of oscillators, amplifiers, preamplifiers, transformers, transducers, and low-frequency lines.
- Output impedance, by adjustment of the load to yield maximum power indication.
- Frequency-response characteristics of amplifiers, transformers, and other audio-frequency devices.
-
GenRad 1542 Stroboscope
- Low-cost, excellent US Manufactured stroboscope for stopping motion
- Up to 3800 bright-white flashes per minute -to observe motion as fast as 40,000 rpm
- Simple push-button operation
- Compact, light-weight, rugged
-
GenRad 1692 Benchtop LCR Meter
- 0.05% Measurement Accuracy
- 5 Test Frequencies 100Hz to 100kHz
- 5 Impedance Parameters
- Built-in Test Fixture
-
GenRad 1621 Capacitance Bridge
- Range 10-7 pF to 10 µF, 12-digit readout
- 10-ppm basic accuracy
- frequency range 10 Hz - 100 kHz
- combines GenRad 1616 Capacitance Bridge, 1238-A Null Detector & 1316 Oscillator
-
GenRad 1864 Megohmmeter
- 200 Test Voltages from 10 V to 1090 VDC
- Rugged and Portable Analog Megohmmeter
- Up to 3% Accuracy
- 50 kΩ to 200 TΩ Measurement Range
- Reliable High Quality Instrument Designed to Last up to 30 years
-
GenRad 1620 Capacitance Bridge
- 10-5pF to 11.1 µF, 2-or 3-terminal
- frequency range 20 Hz -20 kHz (or higher)
- 0.01% accuracy, 1-ppm resolution
- reads dissipation factor or conductance
- combines GenRad 1615 Capacitance Bridge, 1232-A Null Detector & 1311-A Oscillator
-
GenRad 1659 Digibridge
- 0.1% Measurement Accuracy
- Cost-Effective Solution
- 4 Test Frequencies 100Hz to 10kHz
- 5 Impedance Parameters
- Built-in Test Fixture
-
KVD-500 Kelvin-Varley Voltage Divider
- Suitable for use in voltage and current dividers for calibration and linearity testing
- Eliminates the need for dials & multi-turn potentiometers
- 1 through 6-decade units are available • Resistor accuracies from 0.01% to 1%
- Available as a stand-alone instrument in a plastic case or without a case for panel mounting
- Fully customizable for customers' needs
-
DCCS DC Current Shunt Series
- Allows for High Current Calibration, up to 60 A
- Resistances ranges from 100 µΩ - 1 kΩ
- High Accuracy 0.02%
- Suitable for Direct Current & Technical Frequencies
- Oil-Filled Design Ensures Great Long Term Stability <0.01% Over Many Years
-
esi SR1 Standard Resistor
- New Design, With Improved Specifications
- Versatile working standard
- Laboratory standard of high accuracy and stability
- Adjusted to within 20 ppm of nominal
- 50 ppm long-term accuracy for most values
-
RTD Series - Precision RTD Simulator
- Highest accuracy, highest stability, lowest TC of any RTD Simulator available
- Accuracy for Z Series: 0.005% (0.012 ºC for PT 100)
- Resolution: 1 mΩ (0.0025 ºC for PT 100)
- Stability 0.0002% for 24 hours; 0.0001% for 12 months
-
VRS-100 Series High Resistance Standards
- Set of nine, ten or eleven resistors - 1 kΩ, 10 kΩ, 100 kΩ,1 MΩ, 10 MΩ, 100 MΩ, 1 GΩ, 10 GΩ, 100 GΩ, 1 TΩ and 10 TΩ , open circuit (Depending on model)
- High Accuracy - up to 20 ppm
- Standard voltage: up to 5 kV (voltages of 10 kV are available)
- Excellent for Meggers
-
KVD-700 Precision Kelvin-Varley Voltage Divider
- Primary Calibration grade 100 kΩ Kelivin-Varley Voltage Divider
- Used by National Measurement Institutes around the world
- Built in Wheatstone Bridge allows for a self calibrating circuit
- Employees "Zero tempco foil resistors"
- Direct replacement for Fluke 720A
-
LOM-530 Micro-Ohmmeter Calibration Kit
- Complete set of (5) working standard resistors for calibration of micro-ohmmeters.
- Resistance values can be custom modified per your requirement.
- Calibrates a wide verity of micro-ohmmeters from various manufacturers
